The Maxim Series Operators have a high-pressure die-cast zinc housing that is electrostatically coated. The E-Gard coated gear arms and drive worm are made of hardened steel. The 15 Series EntryGard Operators have a high-pressure die-cast zinc base that is E-Gard coated. The gears and drive worm are made of hardened steel. The #15.101 Dual Arm Operators are designed for windows 20" to 32" wide up to 60" high.
We would expect you to find 20810 on the linkage arm, which measures 4-7/16 overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077. Use an entrygard cover. Any handle style will fit. The #50.00 Dual Arm Operators are designed for windows 24" to 40" wide up to 84" high with a maximum sash weight of 96 lbs.
The Truth 50.32 Maxim Dual Arm is one of the more popular new style operators from Truth. This operator is the same as the 50.10 model (they are interchangeable), but with the painted steel cover riveted to it.
We would expect you to find 20810 on the linkage arm, which measures 4-7/16 overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077. Use an entrygard cover. Any handle style will fit. The #50.00 Dual Arm Operators are designed for windows 24" to 40" wide up to 84" high with a maximum sash weight of 96 lbs.
The Truth 50.32 Maxim Dual Arm is one of the more popular new style operators from Truth. This operator is the same as the 50.10 model (they are interchangeable), but with the painted steel cover riveted to it.
Services
These Window Sash Balances replace single or double hung window balances with a stamped number.
Before ordering, make sure the length and stamped numbers on the channel being replaced match the length and stamped numbers listed below.
While these balances are packaged and sold individually, it is our recommendation that both balances in the window be replaced at the same time.
This will restore the sash to a near new condition, and prolong the life of the window.
Some sash balances have 'wings' on the end caps, and some do not.
Before ordering, make sure the length and stamped numbers on the channel being replaced match the length and stamped numbers listed below.
While these balances are packaged and sold individually, it is our recommendation that both balances in the window be replaced at the same time.
This will restore the sash to a near new condition, and prolong the life of the window.
Some sash balances have 'wings' on the end caps, and some do not.
The 11 Series Operators have a high-pressure die-cast zinc housing that is electrostatically coated.
The E-Gard coated gear arms and drive worm are made of hardened steel.
The #11.10 Single Pull Awning Roto Gear Operators (21-1/2) work with the 13 Series Awning Hinges.
The #11.14 Dual Pull Awning Roto Gear Operators (25-1/2) work with the 13 Series Awning Hinges.
Part number 30897 We Also find the numbers 40245, 30897 or 30897A stamped on the arms.
The #11.12 Single Pull Awning Roto Gear Operators (16-1/8) work with the 13 Series Awning Hinges.
The E-Gard coated gear arms and drive worm are made of hardened steel.
The #11.10 Single Pull Awning Roto Gear Operators (21-1/2) work with the 13 Series Awning Hinges.
The #11.14 Dual Pull Awning Roto Gear Operators (25-1/2) work with the 13 Series Awning Hinges.
Part number 30897 We Also find the numbers 40245, 30897 or 30897A stamped on the arms.
The #11.12 Single Pull Awning Roto Gear Operators (16-1/8) work with the 13 Series Awning Hinges.
Material: Die Cast Casting Number on the crank handle (short style): 40085 (Truth Hardware) We only carry long-style handles from Truth Hardware - all handles fit all operators.
For use on any geared or crank style Truth window or door operator (5/6 spline or spindle size).
Material: Die Cast For use on any geared or crank style Truth window or door operator 5/6 in.
Material: Die Cast Contour Handle and Cover for the Entrygard Operators.
Available in many different finishes.
Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining colour stability for years in direct sunlight.
For use on any geared or crank style Truth window or door operator (5/6 spline or spindle size).
Material: Die Cast For use on any geared or crank style Truth window or door operator 5/6 in.
Material: Die Cast Contour Handle and Cover for the Entrygard Operators.
Available in many different finishes.
Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining colour stability for years in direct sunlight.
The 13 Series Awning Hinges are composed of E-Gard coated steel tracks and support arms with an acetal shoe including a stainless steel insert.
The #13.13 is a 10" long hinge that is recommended for sash heights from 10"- 14".
All you have to do is to confirm your hinge measurement.
We will ship both Left and Right hinges so you do not have to worry about the side of the hinges you want to replace.
The #13.13 is a 10" long hinge that is recommended for sash heights from 10"- 14".
All you have to do is to confirm your hinge measurement.
We will ship both Left and Right hinges so you do not have to worry about the side of the hinges you want to replace.
Old style locks have a white plastic insert while the new style locks have a black plastic insert.
For use with tie bar.
Readily adaptable to a tandem configuration.
A single rabbet cut into the lock side of the jaml is all that is necessary for tie bar installation.
Pinhole on underside of small gear for tie bar installation.
This lock is used in conjunction with 6-1473xxx used with a tie bar as a 'slave' lock because you move one lock and this one moves with it.
Tie bars are NOT available as they are provided by window manufacturers and not by Truth Hardware.
For use with tie bar.
Readily adaptable to a tandem configuration.
A single rabbet cut into the lock side of the jaml is all that is necessary for tie bar installation.
Pinhole on underside of small gear for tie bar installation.
This lock is used in conjunction with 6-1473xxx used with a tie bar as a 'slave' lock because you move one lock and this one moves with it.
Tie bars are NOT available as they are provided by window manufacturers and not by Truth Hardware.
Reviews
Be the first to review North Shore Glass & Window Parts.
Write a Review
